// Prototype statements for functions found within this file.

Uint16 j=0x0001;
short i ;
 
void Gpio_select(void);
void delay_loop(Uint16 loop_time);

void main(void)
{

// Step 1. Initialize System Control registers, PLL, WatchDog,
// peripheral Clocks to default state:
// This function is found in the DSP281x_SysCtrl.c file.
   InitSysCtrl();

// Step 2. Initalize GPIO:
// This example function is found in the DSP281x_Gpio.c file and
// illustrates how to set the GPIO to it's default state.
// InitGpio();  // Skipped for this example 

// Step 3. Clear all interrupts and initialize PIE vector table:
// Disable CPU interrupts
   DINT;

// Initialize PIE control registers to their default state.
// The default state is all PIE interrupts disabled and flags
// are cleared. 
// This function is found in the DSP281x_PieCtrl.c file.
   InitPieCtrl();

// Disable CPU interrupts and clear all CPU interrupt flags:
   IER = 0x0000;
   IFR = 0x0000;

// Initialize the PIE vector table with pointers to the shell Interrupt
// Service Routines (ISR). 
// This will populate the entire table, even if the interrupt
// is not used in this example.  This is useful for debug purposes.
// The shell ISR routines are found in DSP281x_DefaultIsr.c.
// This function is found in DSP281x_PieVect.c.
   InitPieVectTable();
  
// Step 4. Initialize all the Device Peripherals:
// This function is found in DSP281x_InitPeripherals.c
// InitPeripherals(); // Not required for this example

// Step 5. User specific code
 Gpio_select();
 
// *******************************************//
// ************    *************//

GpioDataRegs.GPACLEAR.all=0xFFFF; // All GpioAx to  OFF
GpioDataRegs.GPADAT.all=j;    // First led light ON
delay_loop(1000);         // Delay 1[s]

while(1)             //
{
 
 for(i=1;i<8;i++)        // The second led to eighth one lights by turns
 {
  j=0x0001<<(8*i);
  GpioDataRegs.GPADAT.all=j;
  delay_loop(1000);       // // Delay 1[s]
 }
 
 for(i=1;i<8;i++)
 {
  j=0x1000>>(8*i);       // The seventh led to first one lights by turns
  GpioDataRegs.GPADAT.all=j;
  delay_loop(1000);       // Delay 1[s]
 }

}
 

}

void Gpio_select(void)
{
     EALLOW;
  
    GpioMuxRegs.GPAMUX.all = 0x0000;   // Configure MUXs as digital I/Os
                                          
    GpioMuxRegs.GPADIR.all = 0xFFFF;   // GPIO PORTs  as output
 
    GpioMuxRegs.GPAQUAL.all = 0x0000;  // Set GPIO input qualifier values
 
    EDIS;    
}    

//  **********************************************  //
// Delay time function : set i[ms] with delay time function
//  **********************************************  //

void delay_loop(Uint16 loop_time)
{
    short      i;
   
    for (i = 0; i < loop_time; i++) {asm(" RPT #100000 ||NOP ");}
}